Red Rock Mechanical, LLC Blog

Why Do I Need Professional Plumbers to Find Leaks?

May 2nd, 2014

No other task in a home attracts more “do-it-yourself” attention than plumbing repairs…and few other tasks are less suited to it. A couple wrenches on a tool belt won’t make you into a professional plumber, and you certainly won’t help your pipes unless the repair is very simple. You need to put away the home plumbing kit and call for professional plumbers—especially when you have trouble with leaking pipes.

When it comes to leaks, it isn’t only the repairs that require professional plumbers; locating the leaks in the first place needs special skill and equipment. Leak detection is a more difficult job than many homeowners imagine, and having professionals handle the work will save you time, money, and extensive damage to house, both from the leak and trying to repair it.

For a Burlington, VT plumber who can detect all the hidden leaks in your home’s plumbing and fix them so they don’t start up again, call Red Rock Mechanical. We have 24-hour emergency service for those surprise pipe bursts in the middle of the night.

The Importance of Professional Leak Detection

Although leaks can spring up in obvious places, like a pipe beneath a kitchen sink, most plumbing remains hidden behind construction material or in locations where you rarely spend time, like the basement. When leaks start, they will usually occur out of your sight. By the time a leak causes enough damage that you will notice it, the repairs for both the plumbing and the building material can be expensive.

Leaks are often small; one of the more common types is known as “pinhole leaks,” which are even smaller than the name indicates. But small leaks will cause as much damage as large ones if they go too long without detection. Standing water from small leaks will eat away at drywall, warp wood, and encourage the growth of mold and mildew that further deteriorate building material.

To locate leaks that are too hidden and minute for the untrained eye to spot requires plumbers experienced in leak detection and outfitted with special technology. Professional plumbers use listening devices and pressure sensors to spot areas behind walls, under wood floors, and beneath concrete slabs where water is escaping from pipes. This allows them to perform precision excavation to reach the damaged pipe and repair it without causing unnecessary harm to building material.

Because leaks tend to spread, plumbers will extend their search to locate other places where leaks may have started. Expect a thorough job from experienced plumbers that will eliminate leaking throughout your plumbing.

If you suspect you have leaks because of a high water bills, discolored marks on walls, warped floorboards, or mold growth, call Red Rock Mechanical for a Burlington, VT plumber who will quickly find and fix the problem.

Continue Reading

Tags: ,
Posted in Plumbing | Comments Off on Why Do I Need Professional Plumbers to Find Leaks?

Why You Should Get a Cold Climate Heat Pump

April 25th, 2014

Heat pumps are a form of air conditioning system, designed to both warm your home in the winter and cool it in the summer. They are popular in warmer climates because they’re much more efficient than other forms of heating, and they combine the functions of a heater and an air conditioner into one. They do have one large downside, however. When the temperature drops below 40 degrees Fahrenheit, their efficiency drops along with it. Here in Vermont, heat pump technology is looked down upon for that reason. A heater that doesn’t work well in very cold temperatures won’t last long up here. Even so, heat pumps offer a number of benefits to those of us in the Northeast. Here’s a few reasons why you should get a cold climate heat pump.

Heat pumps don’t actually create heat on their own. They simply facilitate a heat exchange with the refrigerant in their system. That means they don’t us gas or other fuel (besides a little electricity to run), and they don’t create any toxic gases the way furnace and other types of heating do. That makes them environmentally friendly, as well as efficient and reliable. We like keep our state green and heat pumps do a lot to help on that front.

But that still doesn’t get around the problem of working on cold days, of which we have plenty. In a number of cases, however, you can marry a heat pump to a smaller electric furnace in a hybrid unit. When the temperature drops, the furnace kicks in, giving the heat pump that extra boost it needs to keep you warm effectively. And because the furnace is so small, you’re still saving money over a forced-air furnace or boiler, while retaining the other benefits that a heat pump offers.

Here in Vermont, heat pump technology can be a viable option, and the experts at Red Rock Mechanical are here to help. We can explain why you should get a cold climate heat pump, then help you find the right system for you. Give us a call today and let us show you what we’re capable of!

For quality air conditioning service in Vermont, call on us for professional installation, repair, maintenance, or replacement of your AC system.

Continue Reading

Tags: ,
Posted in Heating | Comments Off on Why You Should Get a Cold Climate Heat Pump

Cold Climate Heat Pumps: How They Work

April 18th, 2014

If you’ve done some research into heat pumps, you probably already know about their major advantages: air conditioning and heating power in one unit, low cost heating, and space-saving. But you may have also come across one of their disadvantages: inefficient heating power in extreme cold temperatures.

It’s true that a heat pump will begin to lose efficiency in heating mode when the outdoor temperature falls below freezing. A heat pump must remove heat from the outdoor air and bring it into a home; although there is always some heat available in the outdoor air, no matter how low the temperature drops, it becomes harder for a heat pump to extract it once it dips below the economic balance point, a temperature usually around freezing (it varies due to humidity).

We definitely recommend heat pumps for people when it comes to cooling, since these systems work ideally at this task no matter the outdoor heat. But in Vermont, sub-freezing weather in winter is the reality. Because of this, we suggest homeowners look into cold climate heat pumps (CCHPs) so they can still take advantage of the benefits of a heat pump, but without sacrificing comfort. Contact Red Rock Mechanical and our staff of experts on heating repair and air conditioning maintenance in Burlington, VT today to find out more.

How Cold Climate Heat Pumps Beat The Freeze…And Save Money

Cold climate heat pumps (CCHPs) are also known as dual fuel hybrids because they combine the heat pump with a second backup heater that uses a different fuel source. You can have the heat pump and the back-up installed at the same time, or technicians can use your existing oil or propane-powered heating system and hook the heat pump to it. CCHPs come in both central and ductless models, so you can have one easily installed without existing ductwork in your home. Professionals can retrofit a home with a ductless system in less than a day.

CCHPs, when professionally installed, delivery three times more heat energy than they consume in electrical power. This is because heat pumps do not generate heat, but instead move it, a less energy-draining operation. In the case of extreme cold weather, the back-up system activates to assist the heat pump when it goes below the economic balance point. With the aid from the oil or propane-heater, CCHPs can deal with temperatures down to sub-zero without suffering efficiency loss.

A study by Efficiency Vermont has shown the difference in costs: A household that uses 850 gallons of heating oil per year (at $4 a gallon) would pay $3,400 for a year of heating. But with a CCHP installed, the same household would use only 170 gallons of oil, plus 7300 kWh of electricity at $.015 per kWh, for a total of $680 (oil) + $1100 (electric) = $1,780 for a year of heating…a savings of $1,620 per year.

Call Red Rock Mechanical today to ask about installation of a cold climate heap pump for your house. We’ll help you determine if one of these systems will work for you. Keep in mind, heat pumps also work as ACs, and you can call us for air conditioning maintenance in Burlington, VT to take care of all aspects of your heat pump.

Continue Reading

Tags: , ,
Posted in Air Conditioning | Comments Off on Cold Climate Heat Pumps: How They Work

Common Causes of Plumbing Repairs

April 14th, 2014

No one likes dealing with plumbing repairs, but they rank among the most disruptive problems for any household. You can’t just tough it out when your toilet backs up or your sink springs a leak that sends water across your kitchen floor. In Plattsburgh, our plumbing repair techs can handle most issues, from a dripping faucet all the way up to a breach of the sewer line.  In every case, our plumbers look for the source of the problem rather than treating the symptoms.

The common causes of plumbing repairs are fair easy to spot, though fixing them usually takes the services of a trained professional.

Plumbing repairs usually boil down to one of two basic issues: water is blocked from getting where it needs to go or water is leaking out of the pipe. (A few outliers exist as well, such as strange smells, but they don’t arise nearly as often.) In the former case, you’re looking at a blockage in the line, which can be caused by any number of things. Grease and fat poured down the drain can solidify, causing a blockage. Other food particles can do the same thing in the kitchen, while hair, soap and toothpaste can create clogs in the bathroom. Outside the home, tree roots can sometimes infiltrate tiny breaches in the pipe, and even outside damage from shifting soil can result in a clogged pipe.

Speaking of damage, leaks and breaches usually stem from damage somewhere in the system. Plumbers tend to look for them near connectors or links, where an imperfect seal can create a leak. Breaches can also occur because of outside sources, or simply because your plumbing has grown old and corroded.

Luckily, the common causes of plumbing repairs are usually easy to treat, provided you have the training and know how to do the job right. That’s where the experts at Red Rock Mechanical come in. We pride ourselves on our experience and expertise, and plumbing repair is one of the focal points for our business. If you need a hand with your Plattsburgh home’s plumbing, whether it’s a big job or a small one, give us a call to set up an appointment today!

Continue Reading

Tags: ,
Posted in Plumbing | Comments Off on Common Causes of Plumbing Repairs

How a Professional Plumber Unclogs Your Drains

April 7th, 2014

Sooner or later, every plumbing system gets drain clogs. Whether it’s hot grease poured down your sink, hair and soap trapped in the tub, or slow blockages building up over time, clogs are inevitable. Many people assume they can treat them with store-bought cleansers or snakes, but in truth a professional plumber is your best option. Here in Williston, plumbing experts utilize a number of tricks to get drains unclogged. Here’s how a professional plumber unclogs your drains.

In the first place, plumbers rarely use chemical cleansers, which can be dangerous and don’t always do the job. Instead, they rely on snakes to handle the bulk of the clogs. But plumber’s snakes bear little resemblance to the basic models you can buy at the local hardware store. Many of professional versions are electric, allowing the plumber to bring real power to bear on the issue. They also use removable heads that let the plumber tailor the tool to fit the specific clog.

That’s not the only type of tools that a trained plumber brings to bear. He or she can send video cameras down the drain to ascertain the exact nature of the clog, allowing for an informed decision as to the best piece of equipment of the job.

People often prefer to deal with clogs themselves, but in fact, a qualified plumber can make all the difference. When you look at how a professional plumber unclogs your drains – not just in terms of the tools, but the training and know-how – it’s clear how much of a difference that makes. Here in Williston, plumbing clogs can be treated by the experts at Red Rock Mechanical. If your drains are clogged then give us a call. 

Continue Reading

Tags: , ,
Posted in Plumbing | Comments Off on How a Professional Plumber Unclogs Your Drains

What Makes a Furnace High Efficiency?

March 31st, 2014

In a lot of ways “high efficiency” is in the eye of the beholder. Luckily, you don’t have to depend on subjective opinion to understand what makes a furnace high efficiency. Here in Burlington, VT, heating is no laughing matter and a high efficiency unit can mean big savings during the cold winter months. But who determines what constitutes high efficiency? That is, how can you tell that a “high efficiency” furnace actually is what it claims to be, and not just empty rhetoric from some advertiser somewhere?

The answer starts with the AFUE (Annual Fuel Utilization Efficiency) rating, which all furnaces must possess. It measures the percentage of the energy a furnace uses that actually goes into heating your home. So a furnace with an AFUE rating of 80% would spend 80% of its energy on heating and 20% on waste and inefficiency. Obviously, the higher the rating, the more efficient the furnace, which is where the subjectivity comes in. If you spend 20 years using a furnace with an AFUE rating of 60% and install a new one with an AFUE rating of 75%, it’s going to seem very efficient indeed.

The U.S. Department of Energy has established formal criteria for furnace efficiency. The EnergyStar sticker is used to denote furnaces that are particularly energy efficient: with a 95% AFUE rating or higher for gas furnaces, and an 85% AFUE rating or higher for oil furnaces. (That number drops slightly for gas furnaces in warmer parts of the country.) The EnergyStar rating helps eliminate the uncertainty in the equation and let you choose an efficient heater no matter what the circumstances.

For more on what makes a furnace high efficiency, or for installation options, you can call upon Red Rock Mechanical for help. We stand by our assessments with an ironclad guarantee, and we won’t rest until you are completely satisfied with our work. Here in Burlington, VT, heating systems need to be as efficient as possible. Contact one of our trained technicians today and let us help you make that happen!

Continue Reading

Tags: ,
Posted in Heating | Comments Off on What Makes a Furnace High Efficiency?

Signs of a Furnace Control Board Problem

March 20th, 2014

The modern furnace is a marvel of technology, especially when compared to the furnaces of yore, which were basically large ovens with pipes hooked up to them. Contemporary furnaces have most of their operations linked into a furnace control board, which is the core of how the furnace works. The control board runs a series of operations—starting the electronic ignition, opening the gas valve, checking the burner unit, activating the blower, shutting off the gas, venting the heat exchanger—that moves the furnace through all the stages of providing you with heat.

The control board can malfunction, however, and put your furnace’s operation in jeopardy. When this occurs, you will need to call for professional heating service in Williston, VT to replace the defective board. Red Rock Mechanical can provide this service for you, fast and effectively, when you need it.

Here are signs you may have a malfunctioning furnace control board:

  • Uncomfortable temperatures: If your furnace starts to make you either too hot or too cold, and the thermostat settings seem fine, then the problem might be a control board that is turning components off too soon or letting them run too long. Although there are multiple issues that can cause this malfunction, the control board is one of the main culprits.
  • Interruption of the regular sequence of events: Elaborating on the above warning, pay attention to your furnace’s specific sequence of operation. (Don’t open the furnace cabinet to check, just stay near it and listen to what happens.) Does the blower stage stop suddenly? Are the gas jets not activating? Is the ignition not coming on? Does the blower continue to run after everything else has shut off? Any of these irregularities in the normal sequence of events can indicate control board malfunctions.
  • Diagnostic indicators: Most boards have LED lights to indicate when there is a problem with their operation. If your furnace starts to run improperly, open up the control board access panel to see if any red warning lights have activated. There should be a diagnostic chart on the inside of the panel lid that will explain what the warning lights mean. When you call a technician, describe the diagnostic information so the technician will have a good idea what problem needs to be addressed before coming to your house.

It takes a fine knowledge of electronics and furnace technology to replace a control board. Don’t attempt to fiddle around with the panel on your own without the proper training. Make a call to heating experts with as much information as you can glean from the panel to explain the situation. They can take it from there.

Red Rock Mechanical has helped people in Williston, VT with heating services for 23 years. If you need work done on your furnace’s control board, give us a call.

Continue Reading

Tags: , ,
Posted in Heating | Comments Off on Signs of a Furnace Control Board Problem

Some Problems You May Encounter with Your Gas Furnace

March 13th, 2014

In Montpelier, VT, furnaces are common in many homes. Gas furnaces are inexpensive to operate and very reliable, but like any mechanical system, they will experience breakdowns from time to time. You can call a reliable repair service to resolve the problem, but it helps to spot the signs of those problems as soon as possible, before they lead to more serious issues. Here’s a quick breakdown of some problems you may encounter with your gas furnace.

  • Lack of gas flow. The thermocouple, connected to your ignition system, controls the flow of gas into the heater. If there’s a problem with your ignition system, or indeed with the thermocouple itself, the gas will be shut off (preventing your home from being flooded with the gas but also rendering the heater non-functional until it is fixed). A clogged burner can also disrupt the gas flow, as can problems with the line feeding the gas into the furnace.
  • Lack of heat. A lack of heat usually comes back to a problem with the burners, which push the lit gas through the heat exchanger to warm the air that is ultimately blown into your home. Burners can suffer from a malfunction, and could also become clogged with grime on their surface, which will reduce the levels of heat they generate.
  • Lack of air flow. Low air flow is just as bad as reduced heat, since it forces your furnace to work harder and expend more energy than it should. Low air flow can stem from a faulty motor, a damaged blower fan, or some kind of obstruction in the duct system reducing the space in which the air can move.

The problems you may encounter with your gas furnace don’t matter as much as the service you call upon to correct them. If you need furnace repair in Montpelier, VT, call Red Rock Mechanical today. 

Continue Reading

Tags: , ,
Posted in Heating | Comments Off on Some Problems You May Encounter with Your Gas Furnace

3 Signs You Need to Schedule Heating Repair in Burlington, VT

March 4th, 2014

In Burlington VT, heating problems need to be fixed quickly. A day without a functioning heating system means more than bother and inconvenience: it may constitute an actual safety risk to your family. A good heating company can respond right away, but it helps if you can spot the signs of trouble sooner rather than later. That will let you get ahead of the problem and take care of it before it shuts down your heater for good. Here are three signs that you need to schedule heating repair in Burlington VT.

  • No air flow or reduced air flow. This category also includes instances where your heater refuses to turn on at all. If air flow is lowered, it reduces your heater’s ability to warm your home. If it’s stopped completely, no heat will go into your home. The cause could range from a clogged filter to a damaged fan motor, but usually needs professional attention to fix.
  • No heat. Similarly, your heater may be moving the air just fine, but heat levels may be lowered or nonexistent. This usually means a problem with the burners or heating coils, though it could also stem from a blockage at some point in the system.
  • Higher bills. Sometimes, there’s nothing specifically wrong with the system, but lack of efficiency and/or worn parts are preventing it from functioning at its best. You can usually spot these problems by monitoring your monthly bills. If your heating costs spike despite the fact that you’re not using your heater any more often than normal, you’re probably looking at a faulty or worn component that could use repairing or replacing.

If you spot the signs you need to schedule heating repair in Burlington, VT, the next step is to call the experts at Red Rock Mechanical for help. We’ve been a mainstay of the area for over two decades, and we take pride in complete satisfaction for our customers. If your heater is showing signs of distress, don’t hesitate. The sooner was can get there, the faster we can get your heating system back into fighting shape.

https://www.redrockmechanical.net/heating

Continue Reading

Tags: ,
Posted in Heating | Comments Off on 3 Signs You Need to Schedule Heating Repair in Burlington, VT

Why is My Furnace Blowing Cold Air?

February 25th, 2014

Here in Stowe, VT, heating is a serious concern, and a disruption in service can spell serious problems for your household. “Why is my furnace blowing cold air?” isn’t a question you ever want to contemplate in the depths of winter. As much as we may wish otherwise, such incidents do happen, and when they do you need a first-rate repair services for correct the problem with speed and efficiency. If helps if you understand the process involved in creating the situation. A number of different factors can lead to your furnace blowing cold air.

In some cases, the issue stems from a simple setting with the thermostat. It may be set too low or located in a spot in the house that’s warmer than elsewhere.  Your furnace itself may also contain a faulty component, turning the fan on without igniting the burners or releasing the gas. A repair technician can repair or replace the thermostat, or move it if it needs to be in a different spot, or troubleshoot the sequence of your furnace.

Other problems stem from a lack of fuel, or from the fuel not igniting properly. If you have an older furnace with a pilot light and the light goes out, it won’t produce any hot air. In some cases, clogs or blockages can result in cool air blowing from the furnace as well. For example, if the condensate system is suffering problems, such as the line being clogged with dirt or the reservoir float being closed, then the gas won’t be allowed into the system even if the fans are blowing.

Whatever the cause, it takes a trained professional to determine the source of the problem and correct it. In Stowe, VT, heating repairs can be conducted by the experts at Red Rock Mechanical. We can answer the question “why is my furnace blowing cold air?” then correct the problem with efficiency and care. Give us a call today to make an appointment, and let us show you what we can do!

Continue Reading

Tags: , ,
Posted in Heating | Comments Off on Why is My Furnace Blowing Cold Air?